Your heat pump is an crucial part of your home because it produces year-round comfort. But, like any home comfort system, it’s likely to experience some issues once in a while.

Let’s go over these troubles and how much they might cost to fix, so you’ll have some idea before you call an HVAC technician. Some of the most likely heat pump repair problems include:

  • Heat pump won’t turn on
  • Heat pump won’t turn off
  • Heat pump won’t defrost
  • Heat pump won’t cool
  • Heat pump won’t turn on after changing thermostat
  • Heat pump won’t heat

1. Heat Pump Won’t Turn On

There are lots of reasons why your heat pump won’t turn on, so we recommend checking all of them. Sometimes they are as simple as restoring a thermostat setting or replacing your air filter.

Here’s what to check:

  • Is your thermostat on the correct setting? If you want cooling, make sure it’s set to “cool,” “auto” and that your setting is lower than the ambient temperature. If you want heat, it should be set to “heat,” “auto” and your setting should be higher than the current temperature. If you have a programmable thermostat, put in new the batteries if the screen looks jumbled or blank.
  • Has the circuit breaker been tripped? Your heat pump won’t be able to operate if it lacks power. Reset the corresponding breaker if it’s facing the outside of the electrical panel.
  • Is the air filter blocked? A dirty air filter is problematic for your heat pump. If you can’t see light through it, it’s time to get a new one.

If these steps don’t correct the problem, you’ll need to contact a heating and cooling company like Diedrick's Heating and Air Conditioning.

Estimated Repair Cost

This issue can be complicated, so how much it costs to fix it will depend on what’s wrong.

2. Heat Pump Can’t Shut Down

If it’s very hot or cold outside, your heat pump may need to run longer than normal to reach your desired temperature.

If the weather is typical, check that your thermostat is set correctly and operating normally. If the fan setting is at “on,” the blower motor on your air handler will go 24/7. So, it’ll appear as though your heat pump is working all the time. Constantly using the blower can keep humidity levels in check, but it’ll also increase your electrical bills.

If your thermostat is set correctly, there are a few other problems that could be causing your heat pump to run all the time. They include:

  • A new thermostat that isn’t compatible with your heat pump.
  • A malfunctioning compressor contactor, which regulates the flow of electricity.
  • Leaky ductwork.

Estimated Repair Cost

This can be related to a few issues, so your heat pump repair cost will depend on the problem and how difficult it is.

3. Heat Pump Can’t Remove Ice Buildup

Every now and then during cold weather, your heat pump will temporarily go into cooling mode. This will melt light frost and ice that normally accumulates on the coils. A heat pump that becomes heavily iced over may struggle to heat your home or shut down completely.

Here are a few reasons why this might be happening:

  • Your heat pump doesn’t have sufficient airflow because it’s obstructed by snow, bushes or yard debris.
  • Your gutters are dripping water on top of your heat pump, producing an icy buildup.
  • A part is malfunctioning, which may include the reversing valve, relays, controls or sensors.
  • The outdoor fan motor is damaged, dying or dead.
  • Your heat pump has a refrigerant leak. This is possible if you’re hearing bubbling or hissing noises. Or if you discover a sweet, formaldehyde-like odor close to the outdoor unit.

Estimated Repair Cost

Like we mentioned before, there are a lot of reasons why your heat pump won’t defrost. But here are a few estimated costs for some of these issues. Keep in mind your cost may vary based on your heat pump brand, model and the extent of the problem.

  • Replace reversing valve: $200–$600
  • Replace outdoor fan motor: $250–$650
  • Repair refrigerant leak: Depends on the kind of refrigerant your heat pump uses. R-22 Freon is more expensive since it’s no longer being manufactured.

4. Heat Pump Won’t Cool

Just like a heat pump that won’t turn on, a heat pump that won’t cool can be connected to many problems. We recommend checking for:

  • Right thermostat settings
  • Tripped circuit breakers
  • A clogged air filter
  • Ice on your heat pump

If there’s nothing awry with your thermostat, circuit breakers or air filter, you’ll need help from an HVAC technician to identify a problem with your ductwork or an iced-over heat pump. Like we reviewed earlier, a heat pump that won’t defrost might have a problem with its reversing valve, outdoor fan motor or a refrigerant leak.

Estimated Repair Costs

These repair costs are estimates. Your total cost may vary based on your heat pump brand, model and the severity of the concern.

  • Replace reversing valve: $200–$600
  • Replace outdoor fan motor: $250–$650
  • Repair refrigerant leak: Depends on the kind of refrigerant your heat pump uses. R-22 Freon is pricier since it’s no longer being produced.
  • Seal leaky ductwork: Depends on house size.

5. Heat Pump Malfunctions After Upgrading the Thermostat

If your heat pump won’t turn on after changing the thermostat, the problem is probably connected to your new thermostat. While you can install just about any thermostat with a furnace, the same isn’t true for heat pumps, especially if you have backup or emergency heating.

You can check your new thermostat by changing the fan mode to “on.” If you don’t hear the blower motor running in your air handler, there’s probably a problem with the thermostat.

A couple other typical thermostat problems include:

  • Wiring was done wrong.
  • Thermostat isn’t communicating with heat pump.
  • Thermostat is in emergency heat mode, which involves a reset.

It’s recommended to have a heating and cooling professional recommend a thermostat and expertly install it. That way, you’ll stay away from any compatibility or wiring issues.

Estimated Repair Costs

The cost of professional thermostat installation depends considerably on what type of thermostat you want. While programmable thermostats are less expensive, they lack the advanced features and convenience of a smart thermostat.

6. Heat Pump Isn’t Generating Heat

A heat pump that won’t heat is linked to similar problems with a heat pump that won’t cool. We encourage checking for:

  • Correct thermostat settings
  • Tripped circuit breakers
  • A dirty air filter
  • Ice on your heat pump

An icy heat pump or leaky ductwork will require the help of an HVAC technician. Ductwork is difficult to reach since it’s found behind walls and multiple issues can cause your heat pump to freeze up.

Estimated Repair Costs

These repair costs are estimates. Your total cost may vary based on your heat pump brand, model and the level of the issue.

  • Replace reversing valve: $200–$600
  • Replace outdoor fan motor: $250–$650
  • Repair refrigerant leak: Depends on the kind of refrigerant your heat pump runs on. R-22 Freon is higher priced since it’s no longer being produced.
  • Seal leaky ductwork: Depends on house size.

Resolve All Heat Pump Problems Right Away with Help from Local Experts

Dealing with a malfunctioning heat pump can be irritating, but not when you call Diedrick's Heating and Air Conditioning. Our professionals have been supplying the quality, affordable heat pump repair Seymour homeowners have depended on since 1997. Get in touch with us at 920-833-7967 to request your free estimate now.

Average repair costs are sourced from Fixr, which compiles estimates based on nationwide averages.